MINGXING SUPERHARD TOOLS
Premium Quality Superhard Tools from China Since 1995
News and Resources
diamond saw blade
January 28, 2017
Extra-thin Super Diamond Saw Blade
Instructions for Use
（1）Suitable for precision cutting machine
（2）Clamping-axle in cutting machine head should keep precision verticality with flange, and both radial run-out and face run-out should be kept within precision range.
（3）The blade must be placed in single piece on plate without being pressed heavily or being distortion pressed to cause deforming or damaged.
（4）Carefully putting the head axle to the cutting machine without being pushed hardly. It should touch the plate of the flange before tightening the screw caps.
（5）When start cutting process, the blade should be edged at first and the amount of feed should accord with the security amount of feed of cutting machine.
（6）When start cutting process, the cutting knife should keep linear cutting trace without thrust cutting by hands,
（7）Operating without cooling fluid should be forbidden but keeping sufficient flow rate of cooling water/cooling fluid during cutting.
（8）The target material (stone, etc) must be stationed on the cutting device to keep parallel advancing with cutting direction.
（9）Please never cutting any metallic material, and consult with manufacturer and professional personnel for the category when cutting non-metallic material.
Our Recent Posts
User Guide for Super Diamond Saw Blade (SKU #SSB)